Results 1 to 6 of 6
  1. #1
    Join Date
    Feb 2004
    Location
    St. Peters, MO - LOTO 13MM
    My Ride
    Envision 3200 Intruder
    Age
    39
    Posts
    130
    Thanks
    0
    Thanked 1 Time in 1 Post

    2" Galvanized Square Tubing 1/4" wall

    I recently expanded my lift to fit in a wider slip. I currently have 2 pcs of 2" X 2" X 1/4" wall hot dipped galvanized 6'9" long. I need to get 2 pcs 8-10' long preferably 10'. Does anyone have any ideas? You can get bare from quite a few places. But to get galvanized only source I can find is from lift companies and they are around $2.50 - $2.75 per pound. Any suggestions would be appreciated.

  2. #2
    Join Date
    Jun 2004
    Age
    35
    Posts
    378
    Thanks
    1
    Thanked 20 Times in 9 Posts
    why dont you get bare and get it galvanized?

  3. #3
    Join Date
    Mar 2004
    Location
    Crystal Lake, IL
    My Ride
    33' Eliminator Daytona
    Age
    42
    Posts
    3,750
    Thanks
    207
    Thanked 220 Times in 51 Posts
    Here is a couple of links to a supplier of our metal shop. They are in Earth City, MO. I didn't see any galvanized but didn't know if there was anything in there of use. I will keep looking.

    http://www.easternmetal.com/products...extrusions.pdf

    http://www.easternmetal.com/products.htm

  4. #4
    Join Date
    Mar 2007
    Location
    Lake Saint Louis / Lucky Point
    Posts
    24
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Try Schedule 40 pipe

    Schedule 40 or 80 pipe used on process piping and Fire protection system will get the job done , there are a number of places in the St Louis Area to get it , I use this everyday in my line of buisness, and it run's about $6.25 per foot for galv sch 40 and double that for 80, the steel market is off the charts thats why its so high, drop me a line if you need help getting it.

    ONTHEROXS

  5. #5
    Join Date
    Jun 2004
    Location
    Franky & Louie's LOTO
    Age
    60
    Posts
    222
    Thanks
    21
    Thanked 18 Times in 6 Posts
    I have some pre galvanized 2" 11 gauge that is what most dock builders use it is $2.50 per foot Franky 573-216-9804

  6. #6
    Join Date
    Jan 2004
    Location
    Lee's Summit, Mo.
    My Ride
    Boatless...
    Age
    60
    Posts
    9,298
    Thanks
    2
    Thanked 62 Times in 45 Posts
    Why don't you pick it up from one of the lift company's at the lake?
    Im sure that they stock it.
    MWBP: Insanity Required.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
MWBP Sponsors






Yellow Pages