Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2004
    Location
    Cedar Rapids, Iowa- 1MM Grand Glaize
    My Ride
    32 Envison, V24 BatBoat
    Age
    52
    Posts
    8,366
    Thanked: 2386
    Blog Entries
    1

    yellowed gel coat???

    Kim,
    Do you have a product that will take some slight yellowing out of the gel coat? What products and what steps? Am I SOL?

    Thanks

  2. #2
    Actually, we have compounds. Or, if not too bad, you can buff with Shark Tower. This will remove the yellowing and leave a waxed finish in one step.

    If it's bad, try some muratic acid. It's rough stuff, though...so be careful. And, always wax over it after you apply anything that harsh.

  3. #3
    Join Date
    Jan 2004
    Location
    Quad Cities
    Age
    44
    Posts
    101
    Thanked: 0
    What is the best stuff for oxidation in the gel?

  4. #4
    Depending on the degree of oxidation. For light to medium, use the Shark Tower. For medium/heavy, you will need to compound. We manufacture compound, or you can try Aqua Buff or Aqua Blue. The "Aqua" products are very similar products, very inexpensive, and very effective.

    Be sure to wash the surface between compounding and waxing. ALWAYS wax after compounding to protect the work you've done.
    Kim Amos, President
    Hammerhead Boatworks, Inc.
    Manufacturers/Distributors of Cleaning Frenzy! Detailing Products

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
MWBP Sponsors









Yellow Pages