Page 1 of 2 12 LastLast
Results 1 to 15 of 20
  1. #1
    Join Date
    Dec 2003
    Location
    Omaha, NE
    Age
    42
    Posts
    274
    Thanked: 2

    Boat lift blower/vaccum motor

    My Precision FiberSteel lift motor burned up Sunday. Does anyone know if a replacement could be found locally? I would think I could find one at Grainger. I would like to find one tomorrow so I can boat in the evening.

  2. #2
    Join Date
    May 2004
    Location
    glaize arm,
    Posts
    2,425
    Thanked: 375
    not positive on the name but think it is Bowling electric, or motors or might be bowlinger, anyway they are just a few blocks north of the courthoust in camdenton, on hwy 5 west side of road, they have many motors in stock

  3. #3
    Join Date
    Dec 2003
    Location
    Omaha
    Posts
    1,293
    Thanked: 0
    Cory,

    Call Dan, Chillin' Dee Most, at Jensen Tire. 493-7990. Grainger has them in stock and Dan knows the item number.
    JimmyBaja

  4. #4
    Join Date
    Mar 2004
    Location
    Omaha & LOTO 17MM
    My Ride
    2003 38' Powerplay & MrsJMS
    Age
    56
    Posts
    3,229
    Thanked: 270
    I also got a replacement at Grainger. I just typed the number in from the old one on Graingers web site and it came right up.
    Because there is "No Life Like It"

  5. #5
    Join Date
    Dec 2003
    Location
    Omaha, NE
    Age
    42
    Posts
    274
    Thanked: 2
    Thanks, I'll sneak away from work and head there this morning.

  6. #6
    Join Date
    Dec 2003
    Location
    Omaha, NE
    Age
    42
    Posts
    274
    Thanked: 2
    Dan could not remember the number, but told me to take it to Grainger. No luck. The guy at the counter was useless and did not seem very eager to do some research to help me. I called Precision lift in the Ozarks, where this trhink was built, and they could not even tell me what to use for a motor. This is rediculous. I finnally found out that Bowling Electric in Camdenton, MO is who assembles the boxes for Precision. I called Bowling and he would not tell me any specs but only that he uses 10 different type motors and he needs to see this one. I sent him a digital picture and hope to get a response. I'm starting to get pissed off. It makes no sense to me that the company who manufactures the lift can't tell me a brand, part number or specifications for a blower motor.

  7. #7
    Join Date
    Mar 2004
    Location
    Omaha & LOTO 17MM
    My Ride
    2003 38' Powerplay & MrsJMS
    Age
    56
    Posts
    3,229
    Thanked: 270
    I believe this is the one that mine lift used. If you call me, I might be able to help you find the right one. Better hurry though I'm leaving for the lake in an hour. http://www.grainger.com/Grainger/pro...622036&ccitem=
    Because there is "No Life Like It"

  8. The Following User Says Thank You to JMS For This Useful Post:

    Lakerat (03-19-2013)

  9. #8
    Join Date
    Mar 2004
    Location
    Omaha & LOTO 17MM
    My Ride
    2003 38' Powerplay & MrsJMS
    Age
    56
    Posts
    3,229
    Thanked: 270
    Here is a link to all 8 pages in industrial vacuum motors at Grainger. I believe the motor you want will be a one stage and whatever diameter you have. Match it by pic and specs. Mine had a number and crossed directly off the web site. http://www.grainger.com/Grainger/sea...h_type=catindx
    Because there is "No Life Like It"

  10. #9
    Join Date
    Dec 2003
    Location
    Omaha, NE
    Age
    42
    Posts
    274
    Thanked: 2
    Thanks, that looks close. I was unsure if it had to be a bypass or flow through design.

  11. #10
    Join Date
    Mar 2004
    Location
    Omaha & LOTO 17MM
    My Ride
    2003 38' Powerplay & MrsJMS
    Age
    56
    Posts
    3,229
    Thanked: 270
    Thanks Cory, you cursed me.............My lift has two motor boxes. I replaced one vacuum motor last year and this weekend the other one started making more noise than usual. I'm picking up a spare at Grainger this week, I think its days are numbered.
    Because there is "No Life Like It"

  12. The Following User Says Thank You to JMS For This Useful Post:

    Lakerat (03-19-2013)

  13. #11
    Join Date
    Dec 2003
    Location
    Omaha, NE
    Age
    42
    Posts
    274
    Thanked: 2
    Sorry!! I got the part number from Larry Peltzer, L & N Docks. Grainger No. 2M430, 2 stage, bypass blower.

  14. #12
    thats the right one... do not let any water in the lines, it will take out the plastic flywheel fast, I know from first hand problems---- had a hose that leaked slowly, item number 1611622036 will fix you up..
    Dan


    Chillin Dee Most

  15. #13
    Join Date
    Feb 2004
    Location
    Shawnee, KS
    My Ride
    Chevy 2500HD
    Age
    34
    Posts
    1,219
    Thanked: 43
    Replaced one of my two motors earlier this year. Raymonds has them in stock, but that was the closest for me

  16. #14
    Join Date
    May 2004
    Location
    Indiana
    Age
    39
    Posts
    124
    Thanked: 0
    Damm those little motors. Seems like they also go out

  17. #15
    Join Date
    May 2007
    Location
    OP/LOTO
    My Ride
    Fountain
    Posts
    295
    Thanked: 2
    All,
    Go to Boat Lift Marine Center and get them there. They have the normal flow motors and the high output motors. The high output ones are great on rough water because they get your lift up faster. Those are usually used on the larger lifts (cruisers) so it does not take all day to lift 25000 #s. Don't remember the cost. They are located on 54 Hiway near state park entrance.
    573-348-4999.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
MWBP Sponsors









Yellow Pages